Attachment foot, The edgestitcher, Attachment foot edgestitcher – SINGER W1268 User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

30

- M i i l l i j j

ATTACHMENT FOOT

In order to attach the binder, edgestitcher and the

hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot, Fig. 38.

Mount

binder,

edgestitcher

or

hemmers

sliding

the

attachment to the left as far as possible and tighten
screw.

The mounting slot enables you to sew as close to or

as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.

Fig. 38

THE EDGESTITCHER

The edgestitcher is used in making

lace

insertions,

edgings

and

pipings.

The slots serve as guides. To sew lace
edging to fabric, place the material you

want on top in slot, other piece in slot
4.

To trim with a wide piping, place

Fig. 40

Fig. 39

the fabric in slot 4, and the fold of the piping, to the left in slot 3. For a narrow piping,
the fabric in slot

2

and the folded edge of the piping to the right in slot

3

.

Slot 5 may be used as a guide in stitching a French seam.

place

Advertising