Handle adjustment lever, Figure 19, Handle has three vertical positions in the center – MTD 214-412-000 User Manual
Page 10: Handle has three vertical positions to the left, Figure 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 17.
Handle Adjustment Lever
The handle adjustment lever is located (»n the
right hand handle bar. See figure 18.
Squeeze up on handle adjustment lever anc place
the handle in one of nine (9) positions. See figures
19, 2C and 21.
If the locking pin does not withdraw from the han
dle positioner assembly or if the locking pin does
not seat securely into the holes in the handl 5 posi
tioner assembly, adjustment is required. Refer to
Adjustment Section on page 13.
FIGURE 19.
Handle has three vertical
positions in the center
Handle has three vertical
positions to the right
FIGURE 20.
Right Hand
Handle Bar
'V
i-*
iM
ilH!
¡.
‘ •*
'Hafndl'e
Adjustments .r ^
'W,
Handle has three vertical
positions to the left
'•ts ■
'■f i
■I' 1
FIGURE 18.
FIGURE 21.
10