Vermont Casting 6100 - Manual (Page 16)

17
Only for grills equipped with a side burner
Side Burner Installation
- Continued
9. Replace and tighten the screws that
secure the brass burner.
10.
11.
Insert and tighten the screws through the
front of the control panel to secure the
control valve.
Attach the burner control knob.
7. Insert the knob stem through the
mounting hole in the control panel from
the back side.
8. Insert the orifice end of the control valve
into the burner tube.
IMPORTANT: The valve orifice must seat
properly into the burner tube.
igniter electrode has
been omitted for clarity
valve orifice properly
seated into burner tube