Asus P/I-P55SP3AV - Manual (Page 43)

P/I-P55SP3AV User's Manual
Suspend Switch
The "Suspend Switch" default is "Enable". This enables the SMI
connector on the mainboard. The SMI connector connects to the lead
from a Suspend switch mounted on the system case.
Doze & Standby Speeds
The next two lines set the speed the CPU will operate at during
each mode. The number indicates what the normal CPU speed is di­
vided by.
PM Timers
The next lines control the time-out settings for the Power Man­
agement scheme. The features are "HDD Power Down", which puts
the hard disk into its lowest power consumption mode, and the Doze,
Standby and Suspend system inactivation modes.
The system automatically recovers from any power saving mode
when there is system activity, as, for example, when you type any key,
or when there is an IRQ wake-up event such as moving the mouse
or a modem ring.
"HDD Power Down" shuts down any IDE hard disk drives in
the system if they are not accessed for the specified period. The time
settings range from "1 Min" to "20 Min", or "Disable".
HDD Power Down does not affect SCSI hard disks.
The "Doze Mode", "Standby Mode" and "Suspend Mode" lines
set the period of time after which each of these modes activate. At
'Max Saving' they activate sequentially after one minute each, at 'Min
Saving' after one hour.
3 - 1 6