A danger, Optional oischarge screens, Optional discharge screens – Troy-Bilt 47330 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 4: Operation
Figure 4-7: The illseharge screen must be positioned as shown above. The holes In the tubes
at tbe screen ends must align with the holes In the machine wall. Reinstall discharge screen
rods and then hairpin cotters.
A
DANGER
Do not shred brush, branches or other
material when bar grate is installed.
Materials will exit discharge opening at
high speeds and will not be properly
processed.
OPTIONAL OISCHARGE SCREENS
in addition to the standard discharge
screen with 3/4' diameter hoies and the
bar grate attachment, there are three other
screens to choose from with 3/8‘, 1', and
1-3/4“ diameter hoies.
The smaiier the hoie size in the screen, the
more fineiy shredded materiais can be
processed. Consider the screens with the
iarge hole sizes if you are working with
coarser materiais or wish to minimize
clogging. See the Parts List in this Manual
for part numbers.
Figure 4-8: The bar grata must be positioned as shown above. The holes la the tubes at the
grate ends must align with the holes In the machine wall. Reinstall discharge screen rods
and then hairpin cotters.