Attaching the catcher bag, Operation, Operating controls (see figure 6) – MTD 645C thru 650C User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ATTACHING THE CATCHER BAG
Your shredder is equipped with a catcher bag to catch
the shredded material.
To attach the bag, place the opening of the bag over
the chute deflector so it completely covers the chute
opening. Depress the plunger on the drawstring, pull
on the drawstring until the bag is tight around the
chute opening. Release plunger to lock it into position.
"See figure 5.
OPERATION
KNOW YOUR SHREDDER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SHREDDER. Compare
the illustrations with your shredder to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
-Hopper
Assembly
Oil Fill
Dipstick
Choke
Lever
Throttie
Control
Starter
Handle
FIGURE 6.—Model 645 Shown
OPERATING CONTROLS (See figure 6)
RELEASE BAR
—Used to release the leaf ramp when
raising or lowering.
CHOKE LEVER
—Used to enrich the fuel mixture in
the carburetor when starting a cold engine.
STARTER HANDLE—
Used to manually start the
engine.
THROTTLE CONTROL
—Controls engine speed and
stops the engine.
The operation of any shredder can resuit in for
eign objects being thrown into the eyes, which
can resuit in severe eye damage.
Aiways wear safety giasses or eye
shields.
We
recommend
wide
vision safety mask for over specta
cles or standard safety glasses.