Poulan PLN1514 - Manual (Page 2)

1 - GENERAL INFORMATION
1-1,GENERAL IDENTIFICATION
1. Saw Chain 10. Electric Motor
2, Guide Bar 11. Rear Hand Guard
3. Front Handle 12. Guide Bar Nose
4. Power Cord 13. Sprocket Cover
5. Lock-off Button 14. Chain Catcher
6. Trigger Start/ Stop Switch 15, Bar Retaining Nuts
7. Rear Handle 16. Spikes
8, Hand Guard
9, Oil Tank Cap
17. Tension Adjustment Screw
1-2. SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers on preceding
page to help you locate the safety feature.
1 LOW-K)CKBACK CHAIN helps significantly reduce kickback, or the intensity of
kickback, due to specially designed depth gauges and Guard links.
2 GUKED BAR Reduced kickback guide bar reduces the intensity of kickback,
5 LOCK / OFF BUTTON prevents accidental acceleration of the saw motor. The
trigger cannot be squeezed unless lock/off button is depressed,
6 TRIGGER START / STOP SWITCH stops saw motor when released.
8 HAND GUARD protects the operator's left hand in the event it slips off the front
handle while saw is running.
10 ELECTRIC MOTOR is double insulated for added safety.
14 CHAIN CATCHER reduces the danger of injury in the event saw chain breaks or
derails during operation. The catcher is designed to intercept a whipping chain.
SPECIFICATION
Input .................................................................................................. 120V-, 60Hz, 8Amp
Peak Horsepower............................................................................... 1.5HP
Bar Length...........................................................................................14" {35cm)
Chain Oil Capacity...............................................................................1.7 ounces {50ml)
Net Weight .......................................................................................... 7.5 lbs, {3.4Kg)