COBY CX-CD425 - Manual (Page 4)

Preparation for use
Carefully unpack the unit from its carton (do not attempt to connect anything Switching on Main Power
at this stage). You should have the following items: Your System cames fitted with a mains power cable and plug.
Packing included Plug into the mains socket and switch on. Ensure the voltage is compatible.
1. This User Guide. The Power Standby LED Indicator will On and LCD display the Timer.
2. Main Unit with built in AC plug.
3. Two Speakers Box.
Press the Power Button to turn on your system. The Power Standby LED Indicator
4. Remote Control (batteries not included). will Off and LCD become On and display the previously selected function.
If any these items is missing, consult your dealer. Keep any packaging in case When not in use, switch off and unplug your system from the mains power.
you want to transport the Main unit at some later date.
Adjusting the sound
Connections To adjust the sound level turn the Volume control locatied on the right side of
* Connect the speakers to the speaker sockets on the back of the main unit. your system.
* Connect the right speaker to the right socket and left speaker to the left socket. - Press the VOLUME "Up" or "Down" to get a satisfactory sound level when
Connect the left/right speaker lead wires to the speaker terminals. Pay attention you select the desired program.
to the polarity. The polarity wires (Red wire or Black wire with White stripe) - Press the Mute button to muting the sound.
should connect to the red colour (+) terminals. The Black wire should connect to
the black colour (-) terminals.
Using Headphones
* Connect the AC Power cord to the AC outlet. Plug your headphones into the headphones socket located in the middle of your
* Unwind the FM antenna. system on the left hand side.
The sound will be hear through the headphones, not the speakers.
AC Power Operation
* If you wish to power your Main unit from the mains, find a location that is close
to and within easy access of a mains socket. Do not stretch the cable - if you
Please note :
cannot reach a supply you should find an alternative location for the system. Headphones should have a 3.5mm diameter stereo plug and an impedance
* Connect the AC power cord into a suitable outlet and switch on at the mains plug of 8-32 ohms.
if the socket has a switch.
4