Mr. Coffee 115949 - Manual (Page 4)

INTRODUaiON
Welcome and consratulations on the purchase of your new MR. COFFEE® Coffeemaker. Your
new IS Series coffeemaker will wake up with you in the morning and provide you breaks
and treats during your hectic daily activities. How you enjoy your MR. COFFEE®
Coffeemaker is up to youl
DECANTER USE AND CARE
Follow the instructions below to reduce or eliminate the chance of breaking the glass
decanter;
• This decanter is designed for use with your MR. COFFEE® coffeemaker and therefore
must never be used on a range top or in any oven, including a microwave oven.
• Do not set a hot decanter on a wet or cold surface.
• Do not use a cracked decanter or a decanter having a loose or weakened handle.
• Do not clean the decanter with abrasive cleaners, steel wool pads or other abrasive
materials.
• Discard the decanter immediately if it is ever boiled dry.
• Protect the decanter from sharp blows, scratches or rough handling.
• Do not disassemble the thermal carafe.
• Do not place the thermal carafe in the dishwasher.
A
Warning! To reduce the risk of fire or electric shock, do not remove
any service covers. There are no user serviceable parts inside the
coffeemaker. Only authorized personnel should repair the coffeemaker.
SPECIAL CORD SET INSTRUaiONS
1. A short power supply cord is provided to reduce the hazards resulting from a person or
pet becoming entangled in, or tripping over, a longer cord.
2. An extension cord may be purchased and used if care is exercised in its use.
3. If an extension cord is used, the marked electrical rating of the extension cord must be
at least 10 amps and 120 volts. The resulting extended cord must be arranged so that It
will not drape over a countertop or tabletop where It can be pulled on by children or
tripped over accidentally.
4. This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
You can customize the length of the power cord so that it is the exact length you
desire. To increase the length of the power cord; grasp the power cord (not the
power plug) and gently lift it out of the slot, then pull it away from the coffeemaker. To
decrease the length of the power cord: Grasp the power cord (not the power plug),
lift it out of the slot and gently feed it into the coffeemaker. Lock the cord in the slot
when finished.
\
o