Mr. Coffee TM3 SERIES - Manual (Page 8)

To Brew Iced Tea (cont'd)
A. Slide the steeping basket on top of the
water reservoir until it fits into place
and then secure lid on top of basket
(Figure C). Make sure the steeping dial
is in the closed position (Figure D).
5. Fill the pitcher with ice cubes to the
desired capacity as indicated by the
1, 2 and 3 quart ICE levels marked on
the pitcher (Figure E). Place the pitcher lid
on the pitcher.
P lease N ote : Cold tap water can be used as
a substitute for ice cubes. Instead of filling the
pitcher with ice cubes, simply refill the pitcher
with cold water a second time to the desired 1,2
or 3 quart WATER level. Do not fill to the ICE
level or your pitcher may overflow
during brewing. Refrigerate to chill.
6. Slide the pitcher with lid, spout first, under the
machine. Make sure the spout lid is open
(Figure F).
7. Plug the cord into an electrical outlet and
depress the push button (ON). The indicator
light will illuminate to let you know the
machine is on.
P lease N ote : The first time the machine is
used, it may not be necessary to depress the
push button (ON) to turn the machine on, simply
plugging the machine into an outlet will start the
brewing cycle. Also, if the push button (ON) is
depressed before the machine is plugged into
an outlet, plugging the machine into an outlet
will start the brewing cycle.
8. When the brewing cycle is completed, The Iced
teamaker will shut off automatically. Drain the
remainder of the tea in the steeping basket by
turning the steeping dial to "OPEN” (Figure G).
N ote : For extra strength, wait a few minutes
before draining the remaining tea into
the pitcher.
F igure C F igure D
S fout ( jo
F igure G