Century PM-1378AB - Manual (Page 26)

ADDITIONAL INFORMATION
Vehicle may already be equipped with a tether
anchor (top strap anchor). See vehicle owner’s
manual for location.
If vehicle does not have a tether anchor, one must
be installed:
• Contact vehicle dealership for proper
anchor location and installation.
• Before installing anchor, install car seat with
harness system on a vehicle seat and check
that the lap belt portion of the vehicle belt
will hold car seat securely. If not, move
car seat to another seating position.
❃
Installation of Anchor Hardware
Anchor Hardware
Bolt
Washers (2)
Nut
Anchor Ring
Lock Washer
Avoid serious injury or death:
• Be sure anchor hole is properly sealed
to prevent exhaust fumes and water
from entering the vehicle.
• If you wish to remove anchor once child
outgrows car seat, make sure hole is
properly plugged or sealed to prevent
exhaust fumes from entering the
vehicle.
WARNING
Bolt
Anchor
Ring
Washer
Vehicle
Frame
Washer
Lock
Washer
Nut
Anchor hole may
require drilling.
24