MTD 243-680 User Manual
Power vacuum, Model nos, Safe operation practices for power vacuums
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
l O t f c
Model Nos.
POWER VACUUM
243-670
243-680
I M P O R T A N T
SAFE OPERATION PRACTICES FOR POWER VACUUMS
1. Read the operating and service instruction manual
carefully. Be thoroughly familiar with the controls
and proper use of the power vacuum.
2. Never allow children to operate this power vacu
um.
3.
Keep the area of operation clear of all persons,
particularly small children and pets.
4. Check fuel before starting engine. Do not fill fuel
tank indoors, when engine is running, or while en
gine is hot. Wipe off any spilled fuel before start
ing engine.
5. Do not change engine governor settings.
6. Do not put hands near rotating parts for any rea
son.
7.
If the power vacuum should start to vibrate ab
normally, stop the engine and check immediately
for the cause. Vibration is generally a warning of
trouble.
8. Before cleaning, repairing or inspecting make cer
tain all moving parts have come to a complete
stop. Disconnect spark plug wire and keep wire
away from plug to prevent accidental starting.
Also keep throttle control lever in the stop position.
9. If the power vacuum should become blocked with
debris at any point shut engine off and wait until
the impeller comes to a complete stop before at
tempting to remove the obstruction. Disconnect
spark plug wire to prevent accidental starting.
10. Check all bolts for tightness at frequent periods.
11.
Never store this power vacuum with fuel in the
tank. Allow engine to cool before starting in any
enclosure.
12. Keep bag and equipment free of debris when not
in use.
13. Never operate this power vacuum unless air duct
and vacuum bag is properly affixed in their place.
Large zippered end of bag must be closed when
operating to prevent objects from being blown out.
14. Never empty vacuum bag when engine is running.
15. Never change inlet nozzle or auxiliary hose attach
ment when engine is running.
16.
The manufacturer recommends that the operator
wear safety glasses or some other suitable eye pro
tection when operating this machine.
17. Check the vacuum bag frequently for wear and re
place when necessary.
M T D P R O D U C T S I N C
5389 WEST 130th STREET
P. 0. BOX 2741 CLEVELAND OHIO 44111
FORM NO. 770-4105