Don’t overload the – Generac 6500XL 09779-2 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Generac Portable Products 6500XL Extended Life Generator

DON’T OVERLOAD THE

Overloading a generator in excess of its rated wattage

capacity can result in damage to the generator and/or

connected electrical devices. Observe the following, to
prevent overloading the unit:

• Add up the total wattage of all electrical devices to be

connected at one time.This total should NOT be greater

than the generator’s wattage capacity.

• If the appliance, tool or motor does not give wattage,

multiply 120 Volts times ampere rating to determine

watts (volts

X

amps = watts).

The rated wattage of lights can be taken from wattage

listed on the light bulbs.The rated wattage of tools,

appliances and motors can usually be found on a data

plate or decal affixed to the device. Use Figure 12 below
as a general reference.

Some electric motors, such as induction types, require

about three times more watts of power for starting than

for running.This surge of power lasts for only a few

seconds when starting such motors. Be sure you allow

for this high starting wattage when selecting electrical

devices to connect to your generator. First figure the

watts needed to start the largest motor. Add to that
figure the running watts of all other connected loads.

-Wattage Reference Guide

Recreational/Home Uses

TOOl/^X|)pliariCee**eee**ee**ee**ee**ee***ee**ee**ee**ee***ee**ee**eeAA^attS

AM/FM clock radio................................................................. 50

Light bulb............................................................................. 100

Fan.......................................................................................200

20" color TV......................................................................... 400

*Deep freezer.......................................................................500

Personal computer and 15" monitor.................................... 800

*1/3 hp furnace fen blower...................................................800

Microwave oven...................................................................800

*18 cu ft refrigerator............................................................. 800

Sump pump........................................................................1000

Electric skillet..................................................................... 1250

*14 hp water well pump..................................................... 1400

*12,000 Btu window air conditioner................................... 1400

Space heater..................................................................... 1800

Electric water heater.......................................................... 4000

Professional/Contractor Uses

Tool/AppI ian ce..............................

*1/3 hp airless sprayer

3/8" hammer drill

Variable speed Sawzall®...

14" power drill

Quartz-halogen work light

Belt Sander.

1 'A" circular saw

7 14" worm drive saw

*1/4 hp air compressor....

*10" power miter saw.

6" bench grinder.

*6" table planer.

*10" table/radial arm saw

Wire feed welder............................................................

* allow 3 times listed watts for starting this device

.Watts

600

600

960

1000

1000

1200

1500

1600

....1800

1800

1800

1800

2000

.... 2400

10

Advertising