2. safety features – Poulan PLN1510 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 - GENERAL INFORMATION
i-7. GENERAL IDENTIFICATION
1.
Saw Chain
12.
Hand Guard
2.
Guide Bar
13.
Oil Tank Cap
3.
Front Handie
14.
Electric Motor
4.
Handle Bracket
15.
Rear Hand Guard
5.
Inner Pole
16.
Guide Bar Nose
6.
Power Cord
17.
Sprocket Cover
7.
Coupling Nut
18.
Chain Catcher
8.
Outer Pole
19.
Bar Retaining Nuts
9.
Lock-off Switch
20.
Spikes
10, Trigger Start/ Stop Switch
21.
Tension Adjustment Screw
11. Rear Handle
1-2. SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers on preceding page
to help you locate the safety feature.
1 LOW-KICKBACK CHAIN
helps significantly reduce kickback, or the intensity of
kickback, due to specially designed depth gauges and Guard links.
2
GUIDE BAR
Reduced kickback guide bar reduces the intensity of kickback.
9 LOCK! OFF BUTTON
prevents accidental acceleration of the saw motor.The
trigger cannot be squeezed unless iock/off button is depressed.
10 TRIGGER START / STOP SWITCH
stops saw motor when released.
11 HAND GUARD
protects the operator’s left hand in the event it slips off the front
handle while saw is running.
14 ELECTRIC MOTOR
is double insulated for added safety.
18 CHAfN CATCHER
reduces the danger of injury in the event saw chain breaks or
derails during operation.The catcher is designed to intercept a whipping chain.