Poulan 2000-11 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I Sâfrry SUSSES 1

yy

The operation of any tractor can result in foreign objects thrown into the

eyes, which can result in severe eye damage. Always wear safety
glasses or eye shields while operating your tractor or performing any

adjustments or repairs. We recommend a wide vision safety mask over
spectacles or standard safety glasses.

HOWTO USEYOURTRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator
presence sensing switch. When engine
is running, any attempt by the operator to
leave the seat without first setting the

parking brake will shut off the engine.

• Depress clutch./brake pedal into full

“BRAKE” position and hold.

• Place parking brake lever in “EN­

GAGED” position and release pres­
sure from clutch/brake pedal. Pedal
should remain in “BRAKE” position.

Make sure parking brake will hold

tractor secure.

Throttle/Chokr

Control

i

'1

Attachment Clutch

Lever “Engaged”

/ Position

I ¡^Ignition Key

Clutch7''T^ _ \

Brake
Pedal

1 \ \

" 1

' “Disengaged”

** Position

Parking

/Brake

“Engaged”

,. J Position

''

f

..

.

1

' - ^

\ Gearshift

Lever

“Brake

Position

STOPPING

“Disengaged'

Position

MOWER BLADES -

• To stop mower blades,move attach­

ment clutch lever to “DISENGAGED”
position,

GROUND DRIVE -

• To stop ground drive, depress clutch/

brake pedal into full “BRAKE” position.

• Move gearshift lever to neutral (N)

position.

ENGINE-

• Move throttle control to slow position.
NOTE: Failure to move throttle control to
slow position and allowing engine to idle
before stopping may cause engine to
“backfire”.

• Turn ignition key to “OFF” position and

remove key. Always remove key when
leaving tractor to prevent unauthorized
use.

• Never use choke to stop engine.

IMPORTANT: Leaving the ignition
switch in any position other than "OFF"
will cause the battery to be discharged,

(dead),
NOTE: Under certain conditions when

tractor is standing idle with the engine

running, hot engine exhaust gases may

cause “browning” of grass. To eliminate

this possibility, always stop engine when

stopping tractor on grass areas.

CAUTION: Always stop tractor

completely, as described above, before

leaving the operator's position; to empty

grass catcher, etc,

TO USETHROTTLE CONTROL

Always operate engine at full throttle.

• Operating engine at less than full

throttle reduces the battery charging

rate.

• Full throttle offers the best bagging

and mower performance.

TO MOVE FORWARD AND BACK­

WARD

The direction and speed of movement is
controlled by the gearshift lever.

• Start tractor with clutch/brake pedal

depressed and gearshift lever in

neutral (N) position.

• Move gearshift lever to desired

position.

• Slowly release clutch/brake pedal to

start movement.

IMPORTANT: Bring tractor to a complete

stop before shifting or changing gears.

Failure to do so will shorten the useful

life of your transaxle.

12

Advertising