Poulan PPBP30-9096320642 - Manual (Page 5)

Secure hair above shoulder length. Do not wear jewelry, loose clothing,
or clothing with loosly hanging straps, ties, tassels, etc. They can be
caught in moving parts.
Always stop unit and disconnect spark plug before cleaning or servicing.
A WARNING;
Fire hazard. Never mix, pour, or store gasoline or use the unit near a flame or spart<s
{including smoking, open flames, or work that can cause sparks).
AWARNING:
The muffler is very hot during and after use.
Do not touch the muffler, muffler guard, or surrounding surfaces, or allow combustible
material such as dry grass or fuel to do so.
Tho engine continues to rotate after the unit is switched off.
3 - ASSEMBL Y INSTRUCTIONS
3~1. ATTACH FLBX TUBE
Put the hose clamp{C) on the flex tube(B) before
connecting the flex tube(B) and the fan’s outlet
tube(A) together.
Connect the flex tube (B) to the fan's outlet tube
(A) {Fig. 3-1 A) with a hose clamp (C) (Fig. 3-1B)
and tighten securely {Fig. 3-1B).
3-1A
3-1B
3-2. ATTACH OPERATING TUBE
NOTE: keep the throttle cable as straight as
possible when connecting the blower tubes,
1. Place the unit on flat surface during assembly.
Insure screw mechanism of clamp is
positioned away from operator.
2. Put the hose clamp (C) on the flex tube{8) and
the operating tube before connecting them
together,
3. Turn the throttle linkage mark (D) so it aligns
with the throttle handle (F) (Fig.3-2A). Insert
the operating tube (E) into the flex tube (B)
(Fig, 3-2A) and then tighten securely with a
hose clamp (G) (Fig, 3-2B).