Crestron electronic F to SMB Adapter Cable SRD-FSMB-10 - Manual (Page 4)

F to SMB Adapter Cable, 10 Pack Crestron SRD-FSMB-10
Included Items
The items included in the SRD-FSMB-10 are listed and shown below.
SRD-FSMB-10 Included Items
DESCRIPTION PART NUMBER QTY
F-female to SMB-plug Adapter
Cable SRD-FSMB 10
Industry Compliance
As of the date of manufacture, the SRD-FSMB has been tested and found
to comply with specifications for CE marking and standards per EMC
and Radiocommunications Compliance Labelling.
Installation
Attach the F-male connector from the antenna to the F-female connector
on the SRD-FSMB cable.
Plug the SMB-plug into the SMB-jack on the radio.
CAUTION: Do not pull on the cable to remove the SMB-plug from the
radio. Always pull on the connector with a twisting motion. Damage to
the adapter will result if the cable is pulled.
Attach to
device
F connector
Plug this end
into radio
2 • F to SMB Adapter Cable, 10 Pack: SRD-FSMB-10 Installation Guide – DOC. 6726A