Maintenance and repair instructions – Ryobi 310BVr User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE AND REPAIR INSTRUCTIONS
1. Grasp the air filter cover and press in with your
thumb to release. Remove the cover from the air filter
base (Fig. 25).
2. Turn the air filter cover over and remove the air filter
from the inside (Fig. 26).
3. Wash the filter in detergent and water (Fig. 27). Rinse
the filter thoroughly. Squeeze out excess water and
allow it to dry completely.
4. Apply enough clean SAE 30 oil to lightly coat the filter
(Fig. 28).
Fig. 26
5. Squeeze the filter to spread the oil and remove the
excess (Fig. 29).
6. Carefully reinstall the air filter. Be sure the filter is
seated properly before reinstalling it on the air filter
base (Fig. 30).
Fig. 29
Fig. 30
16