Garmin eTrex Legend - Manual (Page 26)

20
Reference
Data Field - Overview
Two optional data fi elds support the Map Page and can
be programmed to display the following options:
Bearing - The direction from your current location to
a destination.
Course - The direction from your starting location to
a destination.
Off Course - The distance left or right you are from
the original course (path of travel).
To Course - The compass direction you must go in
order to get back to the original course .
Current Destination - The next waypoint on your route.
Current Distance - The remaining distance to
your next waypoint
Current ETA - The estimated time of day you will
arrive at your next waypoint.
Current ETE - The estimated time needed to arrive at
the next waypoint on your route.
Elevation - The altitude above sea level.
Final Destination - The last waypoint on your route.
Final Distance - The remaining distance to your fi nal
destination.
Final ETA - The estimated time of day you will reach
your fi nal destination
Final ETE - The estimated time needed to reach your
fi nal destination.
Heading - Your moving direction.
Pointer - Indicates the direction to the next destination.
Speed - Your rate of travel can be displayed in miles
per hour, kilometers per hour, or nautical miles per hour.
Sunrise - The time at which the sun rises on this day.
Sunset - The time at which the sun sets on this day.
Time of Day - The time for the selected time zone.
Trip Odometer - The accumulated distance traveled.
Turn - The angle difference (in degrees) between
the bearing to your destination and your current line
of travel. ‘L’ means turn Left. ‘R’ means turn Right.
Velocity Made Good - The speed at which you are
closing on a destination along a desired course.
Vertical Speed - Your rate of altitude gain/loss over time.
Data Fields
Status Field, shows satellite
tracking and accuracy.
(Non-programmable)
Programmable Data Field
with list of options.
Two programmable
data fi elds.