Garmin eTrex Legend H - Manual (Page 40)

 eTrex Legend H and eTrex Vista H Owner’s Manual
Main Pages
3. Select Start and follow on-
screen directions for holding
and turning the unit.
A “Just Right,” “Too Fast,”
or “Too Slow” message
appears notifying you to
adjust your turning speed.
Hold the unit level while
turning.
If “Calibration Failed”
appears, repeat the
process.
“Calibration Successful”
appears when finished.
4. Press the ROCKER to return
to the Compass page.
Compass Page Options
Sight ‘N Go—navigate to an
object within your sight (Vista
H only).
•
•
•
•
Stop/Resume Navigation—
turns active navigation for a
route or Go To on and off.
Course or Bearing Pointer—
toggles between the course
pointer and the bearing
pointer.
Data Fields—selects the
number of data fields that
appear on the Compass page.
Change Data Fields—selects
the type of data you want to
show in the data fields.
Calibrate Compass—
accesses the compass
Calibration page (Vista H
only).
Restore Defaults—returns to
factory settings.
•
•
•
•
•
•