Garmin Forerunner 410 - Manual (Page 35)

Forerunner 410 Owner’s Manual 29
Settings
Enable Computer Pairing
Move away (10 m) from other ANT+
accessories while the device is trying
to pair with the computer for the first
time.
1. Verify that the computer is set up
for data upload and that pairing
is enabled in the ANT Agent. See
page 8 .
2. Touch and hold menu > select
Settings > AnT+ > Computer .
3. Select Pairing > on .
4. Bring your device within range
(3 m) of the computer.
5. When the ANT Agent finds your
device, ANT Agent displays the
unit ID and asks you if you want
to pair. Select yes .
6. Your device should display
the same number ANT Agent
displayed. If so, select yes on
your device to complete pairing
process.
noTe: You can prevent your
device from transferring data
to/from any computer, even a
paired computer. Touch and hold
menu > select Settings > AnT+
> Computer > enabled > no .
Send All Data
By default, your device only sends
new data to your computer. You
can force the device to send all data
to your computer. Touch and hold
menu > select Settings > AnT+ >
Computer > Force Send > Yes . All
data will be sent again.