Monitor, Acquiring satellite signals, Putting on the heart rate monitor – Garmin Edge 500 User Manual
Page 8
Advertising
6
Edge 500 Quick Start Manual
acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. Make sure that the front of the Edge
is oriented toward the sky.
3. Wait while the Edge searches for
satellites.
Do not begin moving until the
locating satellite page disappears.
Putting on the Heart rate
Monitor
NOTE: If you do not have a heart rate
monitor, you can skip this step.
Wear the heart rate monitor directly on
your skin, just below your breastplate.
It should be snug enough to stay in
place during your ride.
1. Push one tab on the strap through
the slot in the heart rate monitor.
Heart rate Monitor (Back)
Electrodes
Heart rate Monitor (Front)
Slot
Tab
Heart rate Monitor Strap
2. Press the tab down.
Advertising