Bowflex Xtreme 2 SE - Manual (Page 24)

20 Bowflex Xtreme ® 2 SE Assembly Manual
Assembly Guide
step 20 Cable and Pulley Routing –
Connect Right Squat Cable through the Floating and Main Assembly Pulleys
Slide the Right Squat Frame Pulley (6) to the furthest back hole, as indicated in Figure 20 .
Unwrap the Right Squat Cable from the (6) Pulley and guide the Cable, threading under and through the Rear Cross Bar
Pulley (7), and up through the Floating (8) Pulley . Follow the arrows as indicated in Figure 20 .
Continue to guide the Cable down through the Inner Right Frame Rail Pulley (9), up through the Right Pulley Arm Pulley (10), as
shown in Figure 20 .
Finally, insert the Cable End through the Cable End Stop Ball and attach the Cable Core, as completed during Step 19 .
10
6
8
7
9