Hunter SRC - Manual (Page 21)

16 17
PROGRAM
START
TIMES
STATION RUN TIME
YEAR
MONTH
DAY
RUNNING
AM
PM
24 HR.
SUN MON TUES WED THUR FRI SAT EVEN/ODD
PROGRAM
START
TIMES
STATION RUN TIME
YEAR
MONTH
DAY
RUNNING
AM
PM
24 HR.
SUN MON TUES WED THUR FRI SAT EVEN/ODD
PROGRAM
START
TIMES
STATION RUN TIME
YEAR
MONTH
DAY
RUNNING
AM
PM
24 HR.
SUN MON TUES WED THUR FRI SAT EVEN/ODD
PROGRAM
START
TIMES
STATION RUN TIME
YEAR
MONTH
DAY
RUNNING
AM
PM
24 HR.
SUN MON TUES WED THUR FRI SAT EVEN/ODD
SET CURRENT
DATE /TIME
PROGRAMMING THE CONTROLLER ...................................................................................
The SRC Controller is easy to program. The easy to understand dial
design allows you to step through the process of programming and
activate manual watering with a twist of the wrist.
The SRC display shows time and day when the controller is idle.
The display changes when the dial is rotated to indicate the specific
programming information to enter. When programming, the flashing
portion of the display can be changed by pressing the or buttons.
To change something that is not flashing, press the button until the
desired field is flashing.
The SRC also provides a reference label that is attached to the inside of
the controller door (no more lost or misplaced instructions!). And, extra
space is provided to write in sprinkler station location information.
A full three programs, each with the ability to have four daily start times,
permit plants with different watering requirements to be separated
on different day schedules. Multiple start times permit morning,
afternoon, and evening watering, perfect for the establishment of new
lawns and thirsty annual flowers. A built-in 365 day calendar clock
accommodates odd/even watering restrictions without requiring
monthly reprogramming. Or just simply designate the days of the week
you want to water. The SRC makes it easy.
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed or
programmed. For illustration purposes, flashing
characters are in GRAY type.
Setting the Date and Time
1. Turn the dial to the
SET CURRENT DATE/TIME
position.
2. The current year will be
flashing in the display:
Use the or button to
set the year. After setting the
correct year, push the to
proceed to setting the month.
3. The month and day will be in
the display: The month will
be flashing. Use the or
button to set the month.
Push the to proceed to
setting the day.
4. The day will be flashing:
Use the or button to set
the day of the month.
(The day of the week is
automatically indicated by an
arrow in the bottom of display
pointing to the day.) Push the
button to proceed to setting
the time.
5. The time will be displayed,
and an arrow will be flashing
on AM. Press the or
buttons to select AM, PM, or
24 HR. Press the to proceed
to setting the hours.