Digital telephone installation, Figure 3, T7316 telephone peripheral connections – Nortel Networks T7316 User Manual

Page 23

Advertising
background image

Chapter 1 Telephone configuration overview

23

Telephone Features Programming Guide

Digital telephone installation

If you are connecting a Business Communications Manager digital telephone for the first time,
refer to the following illustrations and steps for installation instructions.

1

Disconnect the line cord from the wall socket before trying to carry out any work on the
telephone.

2

To remove any of the cords, press the release latch on the plug and carefully pull the plug from
the socket.

3

Connect the handset cord to the jack labeled with the telephone icon and route the cord as
shown.

4

If you are using a headset, route the cord along the channel in the base and connect the cord to
the telephone jack that is labeled with the headset icon.

5

Route the line cord through the support and connect the cord to the telephone jack that is
labeled with the jack icon.

6

Attach the support using either pair of slots. To raise the back of the telephone to its highest
position, use these slots.

7

When the above work is complete, plug the line cord back into the wall socket.

Figure 3

and

Figure 4

show the T7316 peripheral connection points, and how to connect the

telephone to a wall jack.

Figure 3

T7316 telephone peripheral connections

Hold button

Puts an active call on hold.

Release button

Hangs up an active call or ends programming.

Table 1

Digital telephone button functions, refer to

Figure 1

and

Figure 2

.

6

7

Advertising
This manual is related to the following products: