Yaesu FT-60R - Manual (Page 24)

R. G. Sparber KG7MQL February 22, 2015 Page 24 of 52
Referring to the figure on [27], you see that following the Standard Memory
Channels there are the PMS Memory Channels. As you turn the tuning knob to
sequence through the channels, you should see 1 through 999, then 0 which is
really 000, and then the L/U pairs of registers. When I first got my radio, I seem
to remember seeing the L/U pairs. But when I recently looked for them, they
were gone. A partial reset of the radio restored them (see [64] and page 46).
Lesson learned: if the radio does not work as described, there might be damage to
the data and/or software image that can be corrected by a reset.
Not shown in the figure on [27] is another set of memories used by the Smart
Search Operation [48]. See also page 46.