Cabletron Systems IP Kamera 9060A MP - Manual (Page 10)

10
IP 9060A-MP (Mega Pixels) Default static dynamic IP Address is 192.168.0.100. the last digit of
IP address (default is 100) can be any number between 1~254, but can not be same as your
PC. If using in any PC, just use HUB and type the 192.168.0.100 in Browser or use “ipedit.exe
“ then you can get in the web page.
* Same SEGMENT: The first 3 number of IP address is same - XXX.XXX.XXX.abc. The part of
XXX is same. Fro Example : IP address is 192.168.1.100 , then another IP address
192.168.1.123 is the IP in same segment .
NOTE:
1. After 9060A-MP (Mega Pixels) had been installed on your PC, it will be registered in DirectX
automatically. Therefore, it can be used as local camera by any software that supported
DirectX, such as MSN, Amcap, Media encoder, Yahoo Messenger as long as you not change
the directory path of 9060’s driver.
2. For those software that only supported old VFM driver, such as Vidcap and net meeting, please
click install VFM device, then you can get the captured images from 9060A-MP (Mega Pixels)
(you should be the administrator at the first install process)
3. For those not totally compatible with VFM, such as QQ and POPO, you should click remove
device button first, then click install VFM device, then you can get the captured images from
9060A-MP (Mega Pixels).
4. Note: if stay for long time as in web page, you would be unable setting and see message
“ Cookie time out “, please go to IE to change setting: “ Tools “ “ Internet operations “, please
click “ Delete Cookies “ and “Delete files “ in “ Temporary Internet file “.