Magnadyne M9900DVDS - Manual (Page 15)

Sirius Satellite Radio Setup
Note: If your Sirius tuner is not activated, call 1-888-539-SIRIUS to activate. The Sirius Tuner ID Number
(ESN) is required during the activation process. Following the instructions below to access the Sirius
Tuner ID Number (ESN):
Accessing you Sirius Tuner ID Number (ESN):
1. Push the MODE button until “SIRIUS” appears in the display area.
2. Push the TUNE button until “DIRECT” appears in the display area. Wait a
few seconds and “CH 000” will then appear in the display.
3. Push the BAND button and the first 4 digits of the 12 digit Sirius Tuner ID
Number (ESN) will be displayed.
4. Push the DISP button and the last 8 digits of your 12 digit Sirius Tuner
ID Number (ESN) will be displayed.
5. Push the TUNE button to exit.
MODE AS/PS
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
BAND W-BND
DISP EQ
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
Sirius Satellite Radio Operation
Selecting Sirius Satellite Radio: Push the MODE button until “SIRIUS”
appears in the display. Please be patient as it may take a minute to receive a
satellite signal.
Manual Tuning:
1. Push the TUNE knob until “NORMAL” appears in the display.
2. Rotate the TUNE knob to select a station from 01-182.
Category Tuning:
1. Push the TUNE knob until “CATEGORY” appears in the display.
2. Push button 1 or 2 to find the desired category.
3. Rotate the TUNE knob and select a station within the category.
MODE AS/PS
2
DISC/CAT
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
Please note that satellite radio signal may be blocked by trees, buildings, bridges or tunnels.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
15
M9900DVDS-UM 4/26/06 14:16 Page 15