Crown Equipment PW 3000 Series - Manual (Page 7)

Truck Weight with Max. Battery
3000
S E R I E S
PW
Serial Number
Capacity with Equally Distributed Load
Truck Type
Units of measure, kg/mm(lb/in)
267-E
Min Max
This truck as released conforms to the mandatory requirements of ASME B56.1
Crown Equipment Corporation New Bremen, Ohio 45869 USA
Max. AMP Hr.
Hour Rate
Load Tire Tread Width
Max. Grade
Model Number
Truck Data Number
Battery Weight
Battery Type
%
D.C. Voltage
Truck Weight Less Battery 5%
SAMPLE
2720(6000)
1250(2758)
615(1358)
635(1400) 370(815)
1234567890123456
PW3000XX
A1234567 E
330(12.9)
E
24
600
6
5
CAPACITY PLATE INFORMATION
The capacity plate is on the top of
the power unit cover. It contains:
• Capacity information
• Truck type (a fire safety rating)
• Truck weight (does not include load)
• Grade rating
• Battery information
• Truck information
Capacity Plate
11 Capacity Plate
SAMPLE
CAPACITY PLATE
The information shown
on this sample plate
does not apply to your
truck.
WHAT IS YOUR TRUCK CAPACITY?
Capacity is the maximum load that can be lifted or
transported with your truck. See the capacity plate on
your truck. Make certain you use the correct units of
measure.
Note: ANSI B56.1 requires that all
data be shown first in Metric units and
then USA units.
TRUCK TYPE
Some truck types are not permitted in areas where there
are fire hazards. Watch for marked areas. For example:
You must not operate a type E or ES truck in an area
restricted to EE or EX trucks.
TRUCK WEIGHT
Dockboards, elevators and some floors have limited
capacity. Check your capacity plate for the weight of your
truck. Remember to add the weight of the load you have
on the forks. Make certain you use the correct units of
measure.
KNOW YOUR LOAD
Do not exceed the capacity shown on your truck's capacity
plate. Be careful when handling long, high or wide loads.
Do not handle unstable loads.
Know the Hazards
Capacity Plate 12