Canon FB630U - Manual (Page 51)

51
S T E P 4
To Edit the Tone Curve
[ ] Click the gamma button.
The Color Correction dialog box opens.
Click the radio button for Tone Curve and adjust the gamma setting.
Click the OK button.
The image in the preview window changes to reflect the new settings.
Hint
You can also open this dialog box by pulling down the Image menu in the
operation panel and selecting Color Correction.
Radio button
You can adjust the setting for each channel: R (red), G
(green), B (blue) or M (RGB or grayscale). You can adjust
each channels independently. (You can adjust RGB only for
a high definition color image.)
Resets the gamma curve to
a straight line.
Shows the input and output
level at the point under the
pointer (control point) in
the graph, expressed as a
value from 1 to 255 where
1 is the darkest and 255 the
lightest. [ I ] is for input and
[O] is for output. If the
output level is larger than
the input level, this results
in a lighter image.
To create a control point on the line, just click any location on the line. After a control point is
displayed in the line you can drag it in any direction. As you drag it to another location, the
gamma value changes. You can set several control points on the gamma curve.