Canon FB630U - Manual (Page 22)

22
S T E P 2
Unit
Specifies the units that define the size of the scanned image.
Set Preferences
You can set preferences for the operating environment which will be used for every
scanning job until you change them. Some of these settings include units of measure
for the display, basic resolution, size of the preview window.
You can also return all the settings to their default values. These settings are
performed in Preferences menu of the operation panel.
The units displayed in this section of the control panel will change.
Unit Dialog Box
Click on the [Prefs] menu in the control panel and select [Unit].The Unit Settings dialog
box will appear.
Unit Settings Dialog Box
Select the desired settings.