Christie Digital Systems 38-VIV202-01 User Manual
Page 10
10
PREPARATION
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
●
Do not drop or bump the projector, otherwise damages or malfunctions may result.
●
When carrying the projector, use a suitable carrying case.
●
Do not transport the projector by using a courier or transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the projector through a courier or transport service,
consult your dealer for the best methed.
MOVING PROJECTOR
Use Carry Handle when moving the Projector.
When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the lens
and cabinet.
When the projector is not in use for an extended period,
put it into case (dust cover) supplied with the projector.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by
rotating the ADJUSTABLE FEET. Projection angle can
be adjusted to 10.5 degrees.
Lift the front of the projector and pull FEET LOCK
LATCHES on both sides of the projector.
1
ADJUSTABLE FEET
FEET LOCK
LATCHES
Release FEET LOCK LATCHES to lock ADJUSTABLE
FEET and rotate ADJUSTABLE FEET to fine tune
position and tilt.
2
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull to undo FEET LOCK LATCHES.
Position and keystone distortion of image can be adjusted
using Menu Operation. (Refer to P20 and 35.)
3