Chief Manufacturing CMS390 - Manual (Page 2)

CMS390/CMS391 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies, Inc., and its affiliated corporations
and subsidiaries, intend to make this manual accurate and
complete. However, Milestone makes no claim that the
information contained herein covers all details, conditions or
variations, nor does it provide for every possible contingency in
connection with the installation or use of this product. The
information contained in this document is subject to change
without notice or obligation of any kind. Milestone makes no
representation of warranty, expressed or implied, regarding the
information contained herein. Milestone assumes no
responsibility for accuracy, completeness or sufficiency of the
information contained in this document.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the CMS390/391 up to (and
including) the display/projector does not exceed 500 lbs
(226.80kg).
DIMENSIONS
1.936
49.181
3.202
81.332
10 - 24 UNC THREADS
17.649
448.295
2X 3.139
79.742
8.825
224.147
14.625
371.475
2.625
66.675
2X 4.688
ADJUSTABLE BOTH DIRECTIONS
119.063
2X .500
12.700
16.000
406.400
.390
9.906
.390
9.906
.575
14.597
2X 1.625
41.275
2X .875
22.225
7.500
190.500
3.750
95.250 1.1/2" - 11.5 NPT TREADS
CMS-390