Changhong Electric W260F8U - Manual (Page 22)

W260F8U/W320F8U/W370F8U
PAGE 19
Scaler Mode
Switch among Fill-screen, 4:3, Wide, Cinema and Subtitle modes.
STILL
Press【STILL】to freeze or unfreeze the current image.
Program Scan
Press 【SCAN】to browse TV programs, this function is the same as “Auto scan” in Channel
Setting Menu
Favorite channel
Press 【FAVOR】to select or set your favorite
channels as show in the right picture
You can press
【P+】/ 【P-】to select the desired Item.
Mode
To select Mode Item, press 【V+】/【V-】 to select
Auto or Manual Mode.
(1) In Auto mode, the channel is auto sorted by the
time, if we watch the channel over ten minutes, it will be set in the first position.
(2) In Manual mode, you can press digit keys on the remote control to edit each channel. In
edit status, you may press 【MENU】 to exit or press 【OK】 to confirm your operation, and
then the channel you edited will be set.
Once you enter into the selected Channel item, the channel will be set
You can press any button of【MENU】,【OK】to exit from the Favorite Menu.
MTS switch
You can press (∞I/II) to select among Mono, Stereo and SAP, in each channel ,Stereo and
SAP mode your selection will be stored.
CCD
Press【CC】to select the caption option，same function to Close Caption item of the menu.
PIP/POP/PBP Function
Press【 】to enter into or exit from the sub-picture mode. In this mode, you can realize
these functions as follows:
1. Press【 】to switch the sub-picture signal source among TV、AV1、AV2、YPbPr、
PC and DVI in cycle.
2. Press【 】to switch the sub-picture mode among PIP、PBP and POP.
● PIP Mode: To overlap a sub-picture (PIP) in small size wherever you want to locate ;
● PBP Mode: To place two pictures in the same size side by side. Both main picture and
sub-picture (PBP) cover half of the display screen area.
● POP Mode: A main picture covers 12/16 of the display screen area while a sub-picture
(POP) covers 1/16.
3. Press【 】to switch between main picture and sub-picture.
4. Press【 】to freeze or continue the current sub-picture .
5. Press【 】to adjust the sub-picture position on display in PIP mode.