Cleveland Range SGL-40-T1 - Manual (Page 23)

BURNER ASSEMBLY GASKET
EXAMINATION PROCEDURE
NOTE: It is imperative that this procedure be completed
at least twice yearly.
1. Turn skillet to ON. The burner must be firing during
this procedure.
2. Using a stainless steel extension mirror, inspect
gasket between burner pan assembly and skillet pan
(sides and front only).
3. Replace gasket if:
- gasket shows signs of deterioration
- a flame can be seen coming through the gasket
- condensation forms on the extension mirror
(indicating escaping heat)
GASKET PART #s
30 GALLON 40 GALLON
SIDES
SK2472402 SK2472402
FRONT
SK2472400 SK2472401
VIEW FROM
UNDERSIDE OF
SKILLET PAN
2 1
1
BURNER PAN ASSEMBLY
GASKET
SKILLET PAN
1
2