Clarke l 1600DC - Manual (Page 26)

MAINTENANCE
WARNING: Maintenance must be done by
authorized personnel only.
CAUTION: Keep all adjustments according
to specifications.
Maintenance Instructions
Return the machine to a Clarke American Sanders
Authorized Service Location every 12 months for main-
tenance inspections.
Switches
WARNING: All electrical repairs must be
done by authorized personnel only. The
machine must be tested after electrical
repairs to make sure it is safe to operate.
Disconnect the electrical plug from the
electrical outlet before doing any
electrical repairs.
The start and stop switch has an interlock which pre-
vents the contacts from being closed. If any part of the
switch is not operating, replace the part. If any part of the
electrical system of the machine is not operating or is
damaged, replace the part. Make sure all connections
are tight. Return the machine to the Clarke American
Sanders Service Branch or a Clarke American Sanders
Authorized Service Center for electrical repairs or test-
ing.
Maintenance Of The Motor
Induction type motors do not require motor brushes.
If repairs to the gear unit or motor are needed, do not
disassemble the gears and motor. Return the machine
to the nearest Clarke American Sanders Service Branch
or Clarke American Sanders Authorized Service Center.
For safe operation, and longer life to your Clarke Ameri-
can Sanders product, use only Clarke American Sand-
ers parts.
NOTE: The grease (503802) for the gear box needs
to be changed every year. The Sander 1600 and
1600DC require 8 oz. of grease.
Page -26 - Clarke ® American Sanders Operator's Manual - Sander 1600DC