Curtis DVD1073 - Manual (Page 8)

PRE/TUN
SETUP REPEAT
VOLUME
+10
OPEN/CLOSE
UP DOWN MEMO AUTO
DVD TUNER
FM MODE
STOP PAUSE PLAY A-B
PROLOGIC STEP ZOOM RESUME
ENTER
PROG CH.SET
SLOW DISPLAY
TIME
N/P SUBTITLE LANGUAGE ANGLE
MENU
TITLE
MUTE
AUX1 AUX2
P-SCAN
[S-Video] -Select if you connected the DVD player
to your TV using the composite Video output.
[YUV] -Select if you connected the DVD player to your TV using the YUV output.
[Y Pb Pr] -Select if you connected the DVD player to your TV using progressive scan.
Press P-SCAN botton on remote control, DVD play Video output S-video YUV, Pr Pb Y selection.
7 22
REMOTE
CONTROLLER
SYSTEM SETUP
Audio Setup
The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components you have
connected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks, you should set Dolby
Digital and others settings to 2 channel to enjoy downmixed stereo audio.
You can set the audio format for each of the following sources: Dolby Digital, MP3, CD and .
DVD playback must be stopped in order to adjust the Audio setup.
Others
AC-3 Setting
Follow these steps to set the analog and digital audio formats of
outgoing Dolby Digital 5.1 soundtracks:
A. From Stop mode, press SETUP.
B. Select Audio and press ENTER.
C. Select Dolby D and press ENTER.
D. Set Analog out to:
6 Channel (default) to output Dolby Digital 5.1 channel
audio from the 5.1 channel analog audio outputs; e.g.,
to a 5.1 channel amplifier.
2 Channel to output downmixed 2 channel stereo from
the stereo audio outputs; e.g., to a VCR or TV.
E. Set Digital out to:
PCM (default) to output 2 channel digital from the optical/coaxial digital audio outputs; e.g., to a Minidisc recorder.
RAW to output the raw 5.1 channel digital bitstream form the optical/coaxial digital audio outputs; e.g., to an
external amplifier with a Dolby Digital decoder.
Off to disable Dolby Digital decoder.
F. Press SETUP to save and exit.
AC3
MP3/WMA
Others
Digital Out
PCM
PCM
Analog Out
5.1 channel
5.1 channel
PCM
Raw
Off
5.1 channel
Language Video Audio More Aud Rating
5.1 channel
2 channel
Off
PCM stands for Pulse Code Modulation, and is the standard 2-channel stereo format used for audio Cds.
A . Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [Video Output], and press ENTER or to display
the [Video Out] submenu:
Note: The Composite video and
S-video output is always available.
Press to change your selection
Language Video Audio More Aud Rating
TV Shape
TV System
Video Output S-Video
YUV
PbPrY
4:3 PS
NTSC
S-video
2
4
5
6
22
7
13
19
14
15
12
10
11
9
21
20
8
OPEN/CLOSE
MUTE
DVD SELECTOR
AM/FM TUNER
AUX1 SELECTOR
AUX2 SELECTOR
N/P TV MODE SELECTOR
0-9 NUMBER KEYS
+10
VOLUME INCREASE
VOLUME DECREASE
PROG PROGRAM
SCREEN DISPLAY
SLOW MOTION
MENU
CHANNEL SELECTOR
SUBTITLE
LANGUAGE
ANGLE
FM STEREO / MONO MODE
TITLE
TIME
1
17
18
16
3
38
37
36
24
27
25
26
SETUP
ZOOM
RESUME PLAY
REPEAT
SCROLL UP
SCROLL RIGHT
SCROLL DOWN
SCROLL LEFT
ENTER
DOWN (search down for radio stations/ previous track)
UP (search up for radio stations/next track)
MEMO (memory/rewind skip)
AUTO (automatic search/forward skip)
STOP
PAUSE
PLAY
A-B REPEAT
PROLOGIC
STEP
28
29
32
31
30
33
35
34
39
42
40
41
PRESET/TUNING(Preset for radio station)
P-SCAN(DVD Video Output mode P-SCAN selection)
23
PCM