B&K TX4430 - Manual (Page 13)

TX4430 SPECIFICATIONS
Power rating: 8 ohms
4 ohms
200 watts
325 watts 1kHz
1 kHz
Frequency response 5 Hz - 45 kHz
Input sensitivity
THD (S+N)
Input impedance
Damping factor
Current (peak to peak)
Slew rate
1A Volts
0.09 % @ 1 kHz
33.2 kohms
400
56 Amps
14 V/usec
Dynamic headroom
S/N (A-weighted)
1.1 dB
95 dB
Voltage gain
Line voltage
Dimensions (O.A.)
28.3
120/220/240 VAC switchable
17"(w)X16"(d)X5.75"(h)
Weight 40 lb
Power consumption
Replacement fuses
875 watts max
9 Amps max current draw
75 watts @ no input
Line-12 Amp/250 Volt Slow Blow
Rails- 6 Amp/250 Volt Slow Blow
Care and cleaning
Under normal use, the amplifier will not require any special care. Over time you may
wish to clean the exterior of the unit by wiping it with a damp cloth to remove any dirt of
dust that accumulates on it. Do not let any liquid enter the amplifier thru the vents in
the top cover. You may clean the connectors on the back panel with isopropal alcohol
annually.
Page 11