BUSH DFTA9DVD - Manual (Page 8)

The Setup Menu System—DVB
1. First Time instaiiation
After all the connections have been made properly, switch on your TV.
Make sure the receiver is connected to the Mains Power and press
<POWER> to switch the receiver on. Then press the
i Source } button to
switch to DVB reception. The i Source )) button is to switch among
DVD, DVB, and USB. If you are using the receiver for the first time, a
First Time Installation Menu will be displayed to guide you through the
initial -setup. Use the Remote Control to finish the setup.
A. At the First Time Installation
Menu, select YES and press the
<ENTER> button on the Remote
Control to proceed.
First Time Iristallatiori
B. Enter your regional settings,
include your Country, Language and
Time Zone . Then select <NEXT>
to proceed.
C. Select Yes to start the Automatic
Channel Search.
First Time lnstailation(2)
Do you want to start Auto Search?
Previous channei iist wiii be repiaced.
D. Wait till scanning is completed.
In case you want to stop the
scanning, press the <RETURN>
button. The channels already
found will still be stored.
When finished, all active
channels found will be stored
automatically. The last found
channel will be played.
2. DVB Mode of Main Menu
Press the <SETUP> button and the
DVB Main Setup Menu will appear.
Then press the <DOWN> button to
highlight the DVB Menu option.
Press the <UP> and <DOWN>
button move on the DVB Menu
and press the <ENTER> button to
enter the DVB Menu-Program list.
1).TV Program
Press the <RIGHT> button to
highlight the TV Program, then press
the <ENTER> button to enter the TV
program options. All active channels
are listed in the Program List,
allowing you to make your own
favorite channel group, move or delete
channels.
Create a Favourite Channel Group
This feature allows you to group your favourite channels. To create
your favorite groups:
A. Select the channel which you would like to add to the group and
go to the Favor column.
B. When the Favor column of the desired channel is highlighted, one
red heart symbol will appear, after you press <ENTER>.
DVB Menu-Program List-Program Edit Table