Front panel controls – BBE 362SW User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Front Panel Controls
(D ©
© © © ©
7.
SUB-WOOFER FREQUENCY:
The phase corrected low frequency information from both chan
nels is summed together and directed through an 18dB/octave filter network. The Sub
woofer Frequency control adjusts this filter, and has a selectable range from 30hz to 120hz.
By simply adjusting the Frequency control you can set the filter's frequency point of the
Sub-woofer circuit. For example, if you set the Frequency control to 40hz - then only the
information below 40hz will be sent to the Sub-woofer Output jack.
2.
SUB-WOOFER LEVEL:
This control adjusts the output level of the sub-woofer circuit. The level
is adjustable from fully off to a gain of 6dB.
3.
CLIP LEDs:
These LEDs indicate when the output of the BBE 362SW is 3dB below true
clipping.
4.
LO CONTOUR:
Each channel shares a common Lo Contour control that regulates the amount
of phase corrected bass frequencies.
5.
BBE FUNCTION:
This push button switch allows for quick comparison of the processed and
unprocessed sound. When the switch is pushed in, the process is on and the indicator LED
is green. When the switch is out, the process is off and the indicator LED is red.
6.
PROCESS:
Each channel shares a common Process control that regulates the amount of
phase corrected treble frequencies.
7
POWER:
This switch controls the primary power to the BBE 362SW.