Beko D1 6633 TS User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oven interior
Before switching on again ensure that all controls are in
the OFF position. Take out all trays and the grill out of the
oven. Clean out the interior with a piece of moist, soapy
cloth. Then, clean it once more with a wet piece of cloth
and let it to dry.
Do not use dry powder agents for cieaning.
Special cleaners that are commercially available may be used
after carefully reading the warning that are written on the
labels.
Do not use these materiais for cieaning
Steel
wool
Cleaning
powders
Hard
abrasive
sponges
* Cataiytic-enameiled modeis;
The oven interior of this model
is coated with catalytic enamel since the catalytic enamel
cleans itsellf, you do not have to perform an extra cleaning
after the cooking operation.
if your oven obtains steei rack;
To clean the steel rack, unscrew
the 4 screws. After cleaning
operation, assemble the steel
rack to the oven body again.
Warning!
Never clean the inside of the oven and trays with hard
brushes, steel pads or knives.
Do not use cleaning agents containing acid or chlorine on
stainiess steel surfaces and the handie.
Cleaning can be
accomplished using a soft piece of cloth wetted with soapy
water or with commercially available special surface cleaners
and a soft piece of cloth.
Repiacing the oven iamp
(in modeis with iamp):
1. Unplug the power cable.
2. Then, remove theprotective glass
cover of the lamp inside your oven
by turning it counterclockwise.
3. Then, remove the bulb by
turning it counterclockwise.
4. After installing the correct bulb
obtained from an Authorized Service,
reinstall the protective glass of the lamp.
18