Aiwa AV-X220 - Manual (Page 12)

PRESEniNG STATIONS
Numbered
buttons i
2
CD
O
nr—nri
=> ÙOÙ c 3)
PRESET NUMBER TUNING
1 Press the TUNER button to select a band.
2 Press the numbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press 0 and 7.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the SET button, and press the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Press the TUNER button to select the band, and
press the UPA or DOWNT button to select a
station. Direct tuning is aiso availabie.
2 Press the SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
DANCE
LIVE f'"
■•A . ;•••
ARENA *
i
; i
llllll HOCK
mra pcp
iUj
c !^
Preset number
3 Repeat steps 1 and 2.
No more stations wiii be stored if a total of 32 stations have
already been stored for all the bands.
When the AM tuning interval is changed, ail preset stations are
cieared. The preset stations have to be set again.
When using the remote control
Press UP^W or DOWNM^ button to seiect a preset number.
The DIGIT buttons on the remote control can not be used when
selecting a preset number.
11
ENGLISH