NewAir AI-400 Series User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. The ice maker will automatically stop working when the unit is full of ice, and the Ice-maker
indicator will switch from blinking to illuminating.
5. Make sure to keep the water in the tank clean. If the unit is not in use for a long period of
time, make sure to take down the water bottle and drain out all of the water from both the
drain port and from the back of the unit.
6. How to get the ice
Open the ice door at the front of the unit and use the ice scoop (included with your purchase)
to take the ice from the unit.
Note: When you turn on the cold water and the ice-making operations at same time, you should
wait a few minutes to allow the water temperature in the cold tank to return to normal temperature.
If the cold water temperature goes up again, use the cold water from the cold water faucet and the
unit will switch to Cold Water operation again after the present ice-making cycle finished.