Replacement items, Setting up your aussietm grill, 8setting up your – Aussie 4200 User Manual
Page 5: Grill, Aussie
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REPLACEMENT ITEMS
QTY.
ITEM
DESCRIPTION
PART#
4200 SERIES
1
Cooking Grid
1025.0.001
1
2
Fire Grate/Ash Dump
1040.8.001
1
3
Grid Bracket
03.6103.00
4
4
Hood Handle
03.6102.00
1
5
Bowl Handle
03.6104.00
1
6
Screw, 10AB
X
1/2
03.0301.01
6
7
Foot, Insert
03.4077.00
2
8
Owners Manual
03.6081.00
1
8
SETTING UP YOUR
AUSSIE
tm
GRILL
Caution:To reduce risk of injury, use caution when opening/closing legs.
step 1. Remove and discard the cardboard tray stand from the legs and wheels, if it is attached to your grill.
Step 2. Make sure the Hood/Bowl
Latch is locked.
Step 3. Hold the grill vertical. Swing
the Pivot Latch away from
the crossrod.
Step 4. Lay the Grill down flat.
Step 5. Raise the rear end of the Hood/Bowl. Lift the Leg
Step 6. Reach for the Bowl Handle underneath.
without wheels up and slide Hook into bottom Bowl
Rotate Grill upward until grill is upright on
Bracket. Close the Safety Latch behind the Leg Hook.
floor.
Step 7. Unlock the Hood Latch. Open the Hood and remove Cooking Grid, and Fire Grate/Ash Dump. Discard the packing
materials. Replace the Fire Grate/Ash Dump right side up and install the Cooking Grid on the Grid Brackets.