Windows 98se or windows 2000 users, Before installation, Attention – Atech Flash Technology PRO-GEAR XM-4U User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Installation
i6
Attention !!!!
Windows 98SE or Windows 2000 users :
Driver installation is required. Please perform software setup
first before inserting
XM-4/XM-4U is an USB 2.0 device and it is backward
compatible with USB 1.1 interface. However, USB 1.1
performance can only be expected when connecting to a
USB 1.1 port.
When XM-4/XM-4U is connected to an USB 1.1 port, following
Windows message may appear:
"A Hl-SPEED USB device is plugged into a non-Hl-SPEED
USB hub. For assistance in solving this problem, click this
message"
This is just a reminder that XM-4/XM-4U is not plugged into an
USB 2.0 port. It does not affect the function of XM-4/XM-4U.
Please ignore the message.
•’ HI-SPEEO USB Device P1u99ed into non-HI-SPEED USB Hub
A Hi-SPEED USB device i$ plugged mx> a non-Hi-SPEED USB hub.
For assstance n scMig ths problem,
<Mi the message.
Please also be sure to remove the power plug of your computer
to avoid electrical shock or damage to your system.