Specifications, Notes on the disc magazine, Compact disc changer – Aiwa ADC-M60 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Notes on the disc magazine
• Be sure to place a disc on the disc tray with the
label side up. If a disc is not set properly, it may
cause damage to the unit.
Compact disc changer
' The disc tray may be taken off from the magazine
if you pull the tray forcibly. If the tray is taken
out, put it back into the magazine as illustrated.
Be sure that both ends of the tray are aligned to
the grooves of the magazine correctly.
System
Frequency response
Wow and flutter
Signal to noise ratio
Outputs
Operating temperature
Dimensions
Weight
Power requirement
D/A converter
Sampling rate
Disc size
Supplied accessories
Compact disc digital audio
system
5 Hz - 20 kHz
Below measurable limit
91 dB or more
Line output (for changer
connector only)
-10 °C to 55 °C
244
X
63
X
169 mm (w/h/d)
(9 %
X
2
'/2
X
6 % in.)
1.8 kg
(3.96 lbs.)
12 V DC car battery
(negative ground)
1 bit DAC, 8 times over
sampling
44.1 kHz
120 mm
Disc magazine (1)
Mounting kit (1 set)
Connecting cable (5 m)
(16.4 ft.) (1)
Design and specifications are subject to change without
notice.
' Be sure all the trays are set In the magazine
when using the unit.
ENGLISH
1
0