Aiphone ADAPTOR PS-18D - Manual (Page 2)

MOUNTING
Power supply should be located in an area which facilitates ease of ventilation, on wall or rack, etc.
(1) For wall mounting;
Attach the mounting bracket to single-gang box or wall with the supplied screws.
(2) In case the power supply be located on equipment rack, it is recommended that first the mounting bracket be attached
on rack and then the power supply be hooked up onto the bracket so that it would not move or fall down.
Mounting bracket
Screw or
Wood
screw
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of one
year after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which
examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision
whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty.
This warranty shall not apply to any Aiphone product which has been, subject to misuse, neglect, accident, or to use in violation of
instructions furnished, nor extended to units which have been repaired or altered outside of the factory.
This warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone
will not be responsible for any costs incurred involving on site service calls.
Aiphone Co., Ltd., Nagoya, Japan
Aiphone Corporation, Bellevue, WA,
PS-18C/D-1(E)0490B
INTERCOM SYSTEMS
® AIPHONE
HOME, BUSINESS, INDUSTRY
Printed in Japan(E)
USA