Beko BT-100 - Manual (Page 5)

LCD Screen
8 Channel Number. Changes from 1 to
8 as selected by the user.
CTCSS Code. Changes from 1 to 38
as selected by the user.
|m]i
Displays the Battery change level.
When the bars are reduced, the
battery needs recharging.
TX Displayed when transmitting a signal.
RX Displayed when receiving a signal.
DCM Displayed when the Dual Watch function is turned On
DCS Displayed when the Digital Code System is turned On
VOX Displayed when the VOX feature is enabled.
SC Displays when the PMR Is scanning all channels.
Displayed when the Key Lock feature is activated.
■ Ill Displays the current Speaker volume level.
A Displays when the call signal Is ON.
o Displays when the vibrator function is activated.
Installations
Removing the Belt Clip
a. Pull the Belt Clip latch forward (away
from the PMR)
b. While pulling the Belt Clip latch, push
up the Belt Clip as shown in Figurel.
Belt Clip latch
Installing the Belt Clip
a. Slide the Belt Clip into the slot as
shown in Rgure2. A "dick” indicates the
Belt Clip is locked into position.
Installing the Battery pack
Rgure 3 Rgure 4
t
O O