Beko 25WLK530HID - Manual (Page 20)

Digital TV Menu:
Digital TV menu also consists of the following
menus os in the Analogue TV menu;
1. PICTURE
2. SOUND
3. SETUP
4. FEATURE
Here, the only difference is the "Digital
Features" option located under the "FEATURE"
Menu. Please see the following picture:
l-?;i
Digital Features P
On/Off Timer P
V
Menu Language P
[/
VCR Mode «1 Off ^
Scart2 Output ^ Scart 1 P
Teletext ^ Auto P
1- /Г 1 Panel Lock ^ Off ^
On the picture below, you can see the sub-menus
located under the option "Digital Features".
To enter Digital Features select Digital feature
using the up/down buttons and press OK to enter.
1. Timer Menu:
By setting the timer in the Timer menu the TV can
be set to automatically switch to another channel
at a specific time.To enter Timer select timer
using the up/down buttons and press right
button.After a short delay the timer menu will
appear.Press the red button to enter a new
timer.Set timer menu is displayed after a short
delay. The settings of date, starting time, ending
time, repeating function, subtitTe and audio
language for the timer are made using the (■, 1')
or (v>, '), ( )
( '•^) and numeric buttons.When complete
Press OK to save the event.
When the set time and hour arrives, a pop-up
menu appears on the screen to prompt the user
whether they would like to switched to the specified
channel or not. Channel switching is enabled via
the (
) button or the timer is cancelled using the
( ) button.
I/
Default Subtitle Language 4 English P
Parental Control P
Common Interface No Module p
Software Upgrade >
"MENU": Back “EXIT": Watch TV
2. Default Audio Language Option:
This setting ensures that the default language will
be audible when it is available with a Broadcast.
Selection is made among languages using the (ft?)
( ) keys.
3. Default Subtitle Language Option:
Set the default language desired.If subtitle option
is activated and the ciefault language is gvaible
with the broadcast you are watching subtitles will
automatically be displayed in this language.
Selection is made among languages using ihe
right/left arrow keys.
4. Parental Control Menu:
Using this menu, the adult user determines a
password with the buttons 0-9 and is able to prevent
access to the channels they determine from among
the 'Program Management' rnenu. When it is
intended to switch to the blocked channel, the
password is prompted.
Besides, it is also activated so that the features like
timer, auto search, rnanual search, prograrn
management found in the menu are not changed.
At the beginning the pin is " 1982 " . After you
enter the pin , the Parental Conrol Menu with the
Chcyige pin option appears. You can change the
pin by using this menu
PARENTAL CONTROL
Current PIN
0-9: to enter p in "MENU”: Back ‘ EXIT”: W atch TV
PARENTAL CONTROL
Parental Lock <. Off D*
Change P IN
"M ENU '; B ack "EXIT': W atch TV
5. Common Interface Menu:
When the Cl module is inserted in order to be able
to watch encoded channels, the inserted module
is viewed in the 'Common Interface' rrienu. It is
possible to access from this option the information
related to the module.
Top up TV feature is supported.
6. Software Upgrade Menu:
The possibility for uploading new software is ensured
via the Software Upgrade rnenu. Menu adjustments
can be done usjng the right/left arrpw buttons. If
new software dafg is being sent along with the
broadcast, new software can be downloaded via
this menu option.
Software updates can be performed automatically
or manually as desired.
When the Auto Upgrade is selected "ON" if there
is a new SW, there will be upgrade every time the
TV passes through stand-by mode.
To receive the new software version, your TV must
be in standby mode.
SO FTW ARE UP UPG RADE
Version 1.3.1.3
Auto Upgriido i O ff >
Search for New Softw are P
-M ENU"; Back "EXIT": W atch TV
-
20
-