American Dryer A Series User Manual

Ada-rk recess kit installation instructions, For use with all gx, gxt, & ext hand dryers), Step 1

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ADA-RK RECESS KIT INSTALLATION INSTRUCTIONS

(For use with all GX, GXT, & EXT hand dryers)

W A R NIN n'

DISCONNECT POWER BEFORE INSTALLING

vvMni^ii^u.

desuna

la

electricidad

antes

de

hacer

reparaciones

STEP 1.

Verify all hardware is present.

(1) Stainless steel recess box
(4) #8 x 1-1/2" stainless steel wood screw
(4) #10 flat washer
(4) #10-32 nut w/ nylon insert

STEP 2.

Begin with a 14-1/2" W x 19-1/2" H
rough wall opening framed on all sides.
Make sure the opening is the correct

distance above the floor. Refer to the
chart below for mounting heights.

Men

35 3/8"

Women

33 3/8"

Children

23 3/8" - 33 3/8"

Disabled

27 3/8"

STEP 3.

Insert the recess box into the rough

wall opening. Run electrical through
conduit entrance as shown. Using the

provided wood screws, secure recess
box to wall studs as shown in figure 3.

X

Advertising